{"id":5157,"date":"2024-05-22T15:26:21","date_gmt":"2024-05-22T13:26:21","guid":{"rendered":"https:\/\/web.castfast.com\/iron\/"},"modified":"2026-02-26T11:36:04","modified_gmt":"2026-02-26T10:36:04","slug":"iron","status":"publish","type":"page","link":"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/","title":{"rendered":"Iron"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Cast iron<\/h1>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

GJL iron alloys<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

GJL is the classic \u201cgray cast iron\u201d material. It is ideal for parts where machinability is more important than extreme strength. Heat transfer and vibration damping are top class with GJL! \n Our range currently includes 7 GJL alloys.<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tObtain a quote<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJL-150 (EN-JL1020, GG15)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for general machine parts, housings and heat transfer components.

Properties<\/b>:\nOffers good damping properties and easy machinability with moderate corrosion resistance and low strength.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJL-200 (EN-JL1030, GG20)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nComponents subject to light (tensile) loads such as small housings, machine beds for light machines, covers, frames for electrical machines.

Properties<\/b>:\nHas a higher strength and hardness than EN-GJL-150, with good machinability and moderate corrosion resistance.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJL-250 (EN-JL1040, GG25)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nMedium-heavy (tensile) loaded parts such as larger machine beds, housings for larger gearboxes, motor housings, pump bodies, valve bodies, base plates.

Properties<\/b>:\nBetter strength than EN-GJL-200, good machinability and good damping properties.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJL-300 (EN-JL1050, GG30)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nHighly stressed machine parts that require greater strength, such as large gearbox housings, press frames, heavy machine beds, large pump bodies.

Properties<\/b>:\nHigher strength than EN-GJL 250, still good machinability.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJL-350 (EN-JL1060, GG35)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for highly stressed machine parts, such as large motor housings, pump bodies, flywheels, large gearbox housings and heavily stressed machine elements.

Properties<\/b>:\nHigher strength and hardness, but limited machinability. Good wear resistance, moderate damping and corrosion resistance. \t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJL-HB235 (EN-JL2050, GG240HB)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for parts that require medium strength and good damping properties, such as motor housings, machine parts and pump housings.

Properties<\/b>:\nHardness of 235 HB. Good damping properties, medium strength and wear resistance. Offers good machinability and is often used for parts that need to absorb vibrations.
\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJL-HB255 (EN-JL2060, GG260HB)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for components that require higher strength and wear resistance, such as brake components, gearbox housings and die-cast molds.

Properties<\/b>:\nHardness of 255 HB. Offers increased strength and wear resistance compared to EN-GJL-HB235, but lower damping properties. Good machinability, but somewhat more demanding than softer cast iron grades. \t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

GJS iron alloys<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

GJS, nodular cast iron, is the all-rounder - stronger and tougher, a good choice for more demanding applications. It can often replace steel, which makes a huge difference in casting. Casting iron is easier than casting steel. The carbon in the molten metal \u201cgrows\u201d, i.e. increases in volume, as it solidifies, creating pressure and making the structure denser. This does not happen with steel. The result is shrinkage during casting, which has to be laboriously controlled.
Our range currently includes 26 GJS alloys. <\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tObtain a quote<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-350-22-LT (EN-JS1015)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tApplications<\/b>:\nComponents requiring high ductility and low-temperature toughness, \nApplications in cold climates, \nCryogenic tanks, \nAutomotive and railroad components, hydraulic components.

Properties<\/b>:\nTensile strength: 350 MPa, \nElongation: 22%, \nExcellent impact strength at low temperatures, \nGood machinability, \nHigh ductility.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-350-22-RT (EN-JS1014)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nGeneral applications at room temperature.

Properties<\/b>:\nTensile strength: 350 MPa, \nElongation: 22%, \nExcellent impact strength at room temperature,\nGood machinability, \nHigh ductility.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-400-7U (EN-JS1020)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nHighly stressed components, such as axles and gears.

Properties<\/b>:\nTensile strength: 400 MPa, \nElongation: 18%, \nGood ductility and impact strength, \nGood machinability.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-400-15 (EN-JS1030, GGG40)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nGeneral machine components, \nHydraulic components, \nAgricultural machinery, \nAutomotive components, \nIndustrial machinery.

Properties<\/b>:\nTensile strength: 400 MPa, \nElongation: 15%, \nGood ductility, \nHigh toughness, \nGood fatigue strength, \nGood machinability.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-400-18 (EN-JS1020)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nComponents, such as \npressure vessels, \npiping components, for offshore and marine applications.

Properties<\/b>:\nTensile strength: 400 MPa, \nElongation: 18%, \nGood ductility and impact strength, \nGood machinability.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-400-18-RT (EN-JS1024)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nGeneral automotive and hydraulic applications at room temperature.

Properties<\/b>:\nTensile strength: 400 MPa, \nElongation: 18%, \nGood ductility and impact strength, \nGood machinability, specified for room temperature.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-400-18-LT (EN-JS1025)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tApplications<\/b>:\nComponents exposed to low temperatures, \nOffshore and marine applications, \nPressure vessels, \nPiping components, \nStructural applications.

Properties<\/b>:\nTensile strength: 400 MPa, \nElongation: 18%, \nExcellent low-temperature toughness, \nGood ductility and impact strength, \nGood machinability.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-450-10 (EN-JS 1040)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for general machine parts, gearbox housings, hydraulic components and agricultural machinery.

Properties<\/b>:\nTensile strength of 450 MPa, elongation: 10%. Good combination of strength and ductility, offers good machinability and toughness. \t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-450-12\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for machine parts that require good strength and high toughness, such as housings, bearing blocks, flanges, chassis and structural parts as well as components in mechanical and plant engineering.

Properties<\/b>:\nTensile strength: 450 MPa,\nElongation: 12%,\nGood strength with high toughness,\nGood vibration damping,\nGood machinability,\nGood dimensional behavior during casting,\nSuitable for complex and robust castings.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-450-18\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed in automotive and machine components as well as in hydraulic applications where high ductility is required.\n

Properties<\/b>:\nTensile strength of 450 MPa, elongation: 18%. Provides excellent ductility and toughness, good machinability and moderate strength. \t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-500-7 (EN-JS1050, GGG50)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nAutomotive components (e.g. crankshafts, axles), \nMachine frames and bases,\nIndustrial gearboxes,\nStructural components,\nHigh-strength machine components.

Properties<\/b>:\nTensile strength: 500 MPa, \nElongation: 7%, \nHigh strength and good toughness, \nGood wear resistance, \nGood machinability, \nGood fatigue strength.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-500-7U\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nComplex machine parts that require precise machining.

Properties<\/b>:\nTensile strength: 500 MPa, \nElongation: 7%, \nHigh strength and good toughness, \nGood wear resistance, \nOptimized for better machinability, \nGood fatigue resistance.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-500-14\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tApplications<\/b>:\nUsed in highly stressed machine parts, gearbox housings and automotive components where a good combination of strength and ductility is required.

Properties<\/b>:\nTensile strength of 500 MPa, elongation: 14%. Good toughness and ductility, offers good machinability and a balanced combination of strength and flexibility. \t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-600-3 (EN-JS1060, GGG60)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nHeavy-duty automotive components,\nMachine parts and tools,\nStructural parts,\nIndustrial machinery,\nHeavy-duty gears and shafts.

Properties<\/b>:\nTensile strength: 600 MPa,\nElongation: 3%,\nHigh strength,\nModerate ductility,\nGood wear resistance,\nGood machinability.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-600-10\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for heavily stressed machine parts such as crankshafts, axles, gearboxes and hydraulic components.\n

Properties<\/b>:\nTensile strength of 600 MPa, elongation: 10%. Provides high strength and toughness, combined with good machinability and wear resistance. Suitable for applications where both strength and ductility are required. \t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-700-2 (EN-JS1070, GGG70)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nHigh-performance machine components,\nStructural parts,\nHeavy machinery,\nHighly loaded gears and shafts,\nPressure-bearing parts.\n

Properties<\/b>:\nTensile strength: 700 MPa,\nElongation: 2%,\nVery high strength,\nGood ductility for this strength level,\nExcellent wear resistance,\nGood fatigue strength,\nGood machinability.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-700-2U (EN-JS1070)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tApplications<\/b>:\nHigh-strength applications that require precise machining.

Properties<\/b>:\nTensile strength: 700 MPa,\nElongation: 2%,\nVery high strength,\nGood ductility for this strength level,\nExcellent wear resistance,\nGood fatigue strength,\nImproved machinability.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-800-2\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed in high-strength components such as axles, crankshafts, gear wheels and machine components that have to withstand high loads.

Properties<\/b>:\nTensile strength of 800 MPa, elongation: 2%. Offers very high strength and hardness, but with limited ductility. Suitable for applications where maximum strength is required but less flexibility is needed. \t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-800-10 (ADI)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for highly stressed machine parts that require high strength and very good toughness, such as chassis and structural components, drive components, brackets, gear parts and components in automotive and mechanical engineering.

Properties<\/b>:\nTensile strength: 800 MPa,\nElongation: 10%,\nHigh strength with very good toughness,\nGood wear resistance,\nGood fatigue strength,\nSuitable for dynamically loaded components and complex geometries.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-900-8 (ADI)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for highly stressed machine parts where high strength and very good toughness are required, such as chassis and structural components, transmission components, brackets, drive parts and components in automotive and mechanical engineering.

Properties<\/b>:\nTensile strength: 900 MPa,\nElongation: 8%,\nHigh strength with very good toughness,\nVery good wear resistance,\nGood fatigue strength,\nSuitable for dynamically stressed components and complex shapes.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-1000-5\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for highly stressed machine parts where high strength and wear resistance are required, such as gear wheels, crankshafts and components in automotive and mechanical engineering.

Properties<\/b>:\nTensile strength: 500 MPa, \nElongation: 7%, \nHigh strength and good toughness, \nGood wear resistance, \nOptimized for better machinability, \nGood fatigue resistance.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-1050-6 (ADI)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for highly stressed machine parts where high strength and good toughness are required, such as gear components, gear wheels, shafts, chassis and drive parts in automotive and mechanical engineering.

Properties<\/b>:\nTensile strength: 1050 MPa,\nElongation: 6%,\nHigh strength with good toughness,\nVery good wear resistance,\nGood fatigue resistance,\nSuitable for dynamically loaded components and complex geometries.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-1200-3 (ADI)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for highly stressed machine parts that require very high strength and good wear resistance, such as gear wheels, shafts, gear components, chassis and drive parts in automotive and mechanical engineering.

Properties<\/b>:\nTensile strength: 1200 MPa,\nElongation: 3%,\nVery high strength,\nGood toughness despite high hardness,\nVery good wear resistance,\nHigh fatigue strength,\nSuitable for components subject to high dynamic loads.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-1400-1 (ADI)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for extremely highly stressed machine parts where maximum strength and very high wear resistance are required, such as gear wheels, shafts, gear components, drive parts as well as chassis and structural components in automotive and mechanical engineering.

Properties<\/b>:\nTensile strength: 1400 MPa,\nElongation: 1%,\nExtremely high strength,\nVery good wear resistance,\nHigh fatigue strength,\nGood dimensional stability for complex components,\nSuitable for applications subject to high dynamic and mechanical stress.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-HB230 (EN-JS 2060)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nSuitable for components that require good wear resistance under medium loads, such as brake disks, gearbox housings and other general machine parts.

Properties<\/b>:\nHardness of 230 HB. Offers good wear resistance and machinability, with moderate strength. Suitable for applications where moderate mechanical stresses and good dimensional stability are required. \t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-HB265 (EN-JS 2070)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for highly stressed parts that require higher strength and wear resistance, such as brake drums, gear wheels and other highly stressed machine parts.

Properties<\/b>:\nHardness of 265 HB. Offers higher strength and wear resistance than EN-GJS-HB230, but at the expense of machinability. Well suited for applications with high wear and mechanical stress. \t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-SiMo45-10\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nIdeal for components that are exposed to high temperatures, such as exhaust manifolds, turbocharger housings and engine parts.

Properties<\/b>:\nHigh temperature resistance due to the addition of silicon and molybdenum. Offers good heat resistance, excellent strength and stability at high temperatures as well as good oxidation resistance. \t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tG-X300 NiMoMg3\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for highly stressed components in the automotive and mechanical engineering industries, especially for components that require high wear resistance and strength.\n

Properties<\/b>:\n Offers very high strength and hardness thanks to the addition of nickel, molybdenum and magnesium. Excellent wear resistance and toughness, ideal for applications under high loads and demanding conditions. \t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-30NiMo\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed in applications that require high strength and toughness, such as components for mechanical engineering, heavy components in the automotive sector, gearboxes and drive shafts.

Properties<\/b>:\nHigh strength and toughness due to nickel and molybdenum, good wear resistance and material fatigue resistance.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-40NiMo\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for highly stressed machine parts, especially in automotive and mechanical engineering, such as axles, gearbox housings, crankshafts and flywheels.\n

Properties<\/b>:\nHigh strength and toughness due to nickel and molybdenum, good wear resistance and material fatigue resistance.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-40SiMo\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nSuitable for highly stressed components in mechanical engineering, such as cylinder heads, turbocharger housings and exhaust manifolds.

Properties<\/b>:\nOffers high strength and heat resistance thanks to silicon and molybdenum. Good wear resistance and stability at high temperatures. \t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJS-50NiMo-Nirest\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nOften used in applications that require high strength and corrosion resistance, such as in the offshore sector, for valves, pumps and demanding machine parts.

Properties<\/b>:\nHigh strength due to the addition of nickel and molybdenum, combined with excellent corrosion resistance. Provides good toughness and wear resistance, even in aggressive environments. \t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

GJMW ferrous alloys<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

GJMW is a malleable cast iron and is used when components need to be tougher and more impact-resistant than conventional gray cast iron. It is ideal for parts that require resilience, good machinability and a certain ductility - in other words, where brittle cast iron reaches its limits.\nTypical applications include brackets, connecting elements, housing parts and general machine parts in mechanical and plant engineering. \n\nOur range currently includes various GJMW alloys, depending on the strength, elongation and operating environment requirements.<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tObtain a quote<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJMW-350-4 (0.8035)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for machine parts where good toughness and sufficient strength are required, such as brackets, levers, clamps, housing parts, connecting elements and components in mechanical and plant engineering.

Properties<\/b>:\nTensile strength: 350 MPa,\nElongation: 4%,\nGood toughness,\nGood impact and fatigue strength,\nGood machinability,\nGood dimensional behavior during casting,\nSuitable for functional and resilient castings.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJMW-360-12 (0.8038)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for machine parts where a combination of good strength and very high toughness is required, such as brackets, levers, clamps, fasteners, housing parts and components in mechanical and plant engineering subject to impact loads.

Properties<\/b>:\nTensile strength: 360 MPa,\nElongation: 12%,\nVery high toughness,\nGood impact resistance,\nGood fatigue strength,\nVery good machinability,\nGood dimensional behavior during casting,\nSuitable for dynamically and impact-stressed castings.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJMW-400-5 (0.8040)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for machine parts that require high strength combined with good toughness, such as brackets, levers, clamps, housing parts, connecting elements and components in mechanical and plant engineering with mechanical and impact loads.

Properties<\/b>:\nTensile strength: 400 MPa,\nElongation: 5%,\nGood strength with solid toughness,\nGood impact resistance,\nGood fatigue strength,\nGood machinability,\nGood dimensional behavior during casting,\nSuitable for resilient and functionally reliable castings.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

GJN iron alloys<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

GJN is a high-alloy chilled cast iron (white cast iron) with very high hardness. It is perfect for components that are subject to extreme wear, abrasion and erosion - in other words, wherever \"normal\" cast iron materials quickly give up.\nTypical applications include pump, conveyor, crusher and processing technology, often with abrasive media such as sand, sludge or particles. \n\nOur range currently includes a GJN alloy.<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tObtain a quote<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tEN-GJN-HB555 (XCr14)\t\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tAreas of application<\/b>:\nUsed for components subject to heavy wear where maximum abrasion and erosion resistance is required, such as pump housings and impellers, linings, conveying and mixing technology, crushing and grinding plants and components for abrasive media (e.g. sand, sludge, particles). Sand, sludge, particles).

Properties<\/b>:\nHardness: approx. 555 HB,\nVery high wear resistance (abrasion resistance),\nHigh resistance to erosion,\nGood corrosion resistance due to chromium content,\nVery pressure-resistant,\nLow elongation \/ brittle behavior,\nSuitable for extremely stressed castings.\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Iron castings - manufactured using the optimum process for your application<\/strong><\/span><\/p><\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

CASTFAST offers you customized iron castings – produced using the exact process that best suits your project, both technically and economically. Whether modern 3D sand printing for fast iterations and complex geometries, classic pattern technology for series production, lost molds or investment casting for maximum precision – we combine different casting processes flexibly and according to your needs. <\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

I<\/b><\/span>Your desired alloy is not listed?<\/strong><\/span><\/p><\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

<\/p>

Send us your inquiry anyway – we will check the feasibility and find the right caster for your project.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\tAre you still unsure? Just talk to us about your options! \t\t\t\t\t<\/span>\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\tContact us\t\t\t\t\t<\/a>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

Cast iron GJL iron alloys GJL is the classic \u201cgray cast iron\u201d material. It is ideal for parts where machinability is more important than extreme strength. Heat transfer and vibration damping are top class with GJL! Our range currently includes 7 GJL alloys. Obtain a quote EN-GJL-150 (EN-JL1020, GG15) Areas of application: Used for general […]<\/p>\n","protected":false},"author":2,"featured_media":4941,"parent":5164,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"elementor_header_footer","meta":{"inline_featured_image":false,"footnotes":""},"class_list":["post-5157","page","type-page","status-publish","has-post-thumbnail","hentry"],"yoast_head":"\nEfficient iron castings with 3D printing technology | CASTFAST<\/title>\n<meta name=\"description\" content=\"Benefit from our flexible and robust iron castings. CASTFAST combines traditional casting processes with innovative 3D sand printing technology.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Efficient iron castings with 3D printing technology | CASTFAST\" \/>\n<meta property=\"og:description\" content=\"Benefit from our flexible and robust iron castings. CASTFAST combines traditional casting processes with innovative 3D sand printing technology.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/\" \/>\n<meta property=\"og:site_name\" content=\"CASTFAST\" \/>\n<meta property=\"article:modified_time\" content=\"2026-02-26T10:36:04+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.castfast.com\/wp-content\/uploads\/2024\/05\/CX38308-Kopie-jpg.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"407\" \/>\n\t<meta property=\"og:image:height\" content=\"530\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"1 minute\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/\",\"url\":\"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/\",\"name\":\"Efficient iron castings with 3D printing technology | CASTFAST\",\"isPartOf\":{\"@id\":\"https:\/\/www.castfast.com\/en\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.castfast.com\/wp-content\/uploads\/2024\/05\/CX38308-Kopie-jpg.webp\",\"datePublished\":\"2024-05-22T13:26:21+00:00\",\"dateModified\":\"2026-02-26T10:36:04+00:00\",\"description\":\"Benefit from our flexible and robust iron castings. CASTFAST combines traditional casting processes with innovative 3D sand printing technology.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/#primaryimage\",\"url\":\"https:\/\/www.castfast.com\/wp-content\/uploads\/2024\/05\/CX38308-Kopie-jpg.webp\",\"contentUrl\":\"https:\/\/www.castfast.com\/wp-content\/uploads\/2024\/05\/CX38308-Kopie-jpg.webp\",\"width\":407,\"height\":530},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.castfast.com\/en\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Materials and industries\",\"item\":\"https:\/\/www.castfast.com\/en\/materials-and-industries\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Iron\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.castfast.com\/en\/#website\",\"url\":\"https:\/\/www.castfast.com\/en\/\",\"name\":\"CASTFAST\",\"description\":\"Guss. Einfach machen.\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.castfast.com\/en\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Efficient iron castings with 3D printing technology | CASTFAST","description":"Benefit from our flexible and robust iron castings. CASTFAST combines traditional casting processes with innovative 3D sand printing technology.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/","og_locale":"en_US","og_type":"article","og_title":"Efficient iron castings with 3D printing technology | CASTFAST","og_description":"Benefit from our flexible and robust iron castings. CASTFAST combines traditional casting processes with innovative 3D sand printing technology.","og_url":"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/","og_site_name":"CASTFAST","article_modified_time":"2026-02-26T10:36:04+00:00","og_image":[{"width":407,"height":530,"url":"https:\/\/www.castfast.com\/wp-content\/uploads\/2024\/05\/CX38308-Kopie-jpg.webp","type":"image\/webp"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"1 minute"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/","url":"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/","name":"Efficient iron castings with 3D printing technology | CASTFAST","isPartOf":{"@id":"https:\/\/www.castfast.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/#primaryimage"},"image":{"@id":"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/#primaryimage"},"thumbnailUrl":"https:\/\/www.castfast.com\/wp-content\/uploads\/2024\/05\/CX38308-Kopie-jpg.webp","datePublished":"2024-05-22T13:26:21+00:00","dateModified":"2026-02-26T10:36:04+00:00","description":"Benefit from our flexible and robust iron castings. CASTFAST combines traditional casting processes with innovative 3D sand printing technology.","breadcrumb":{"@id":"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/#primaryimage","url":"https:\/\/www.castfast.com\/wp-content\/uploads\/2024\/05\/CX38308-Kopie-jpg.webp","contentUrl":"https:\/\/www.castfast.com\/wp-content\/uploads\/2024\/05\/CX38308-Kopie-jpg.webp","width":407,"height":530},{"@type":"BreadcrumbList","@id":"https:\/\/www.castfast.com\/en\/materials-and-industries\/iron\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.castfast.com\/en\/"},{"@type":"ListItem","position":2,"name":"Materials and industries","item":"https:\/\/www.castfast.com\/en\/materials-and-industries\/"},{"@type":"ListItem","position":3,"name":"Iron"}]},{"@type":"WebSite","@id":"https:\/\/www.castfast.com\/en\/#website","url":"https:\/\/www.castfast.com\/en\/","name":"CASTFAST","description":"Guss. Einfach machen.","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.castfast.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"}]}},"_links":{"self":[{"href":"https:\/\/www.castfast.com\/en\/wp-json\/wp\/v2\/pages\/5157","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.castfast.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.castfast.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.castfast.com\/en\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.castfast.com\/en\/wp-json\/wp\/v2\/comments?post=5157"}],"version-history":[{"count":0,"href":"https:\/\/www.castfast.com\/en\/wp-json\/wp\/v2\/pages\/5157\/revisions"}],"up":[{"embeddable":true,"href":"https:\/\/www.castfast.com\/en\/wp-json\/wp\/v2\/pages\/5164"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.castfast.com\/en\/wp-json\/wp\/v2\/media\/4941"}],"wp:attachment":[{"href":"https:\/\/www.castfast.com\/en\/wp-json\/wp\/v2\/media?parent=5157"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}